UHPC concrete for new bridge construction or bridge repair

For more than 25 years, UHPC Ultra High Performance concrete has been used for the construction and repair of concrete bridges worldwide. The mechanical and durability
properties are absolutely ideal for modern bridge construction.
UHPC is used in the production of precast concrete parts and for on-site assembly. With UHPC, very slim and high load-bearing elements can be manufactured quickly, cost-effectively and very precisely. all of our UHPC material qualities can be processed with most types of concrete mixer.

Our UHPC bridge material qualities are usually mixed with a
water / cement ratio of less than 0.25 and a proportion of steel
fibers. Compressive strengths of 150 MPa to over 200 MPa are
achieved in our standard quality.

Our UHPC material properties meet all required technical data,
including in the USA from the responsible DOTs.
All of our UHPC material qualities are subject to a permanent
quality check of the raw materials used, finished products and

processing on site on the construction site.
We use our UHPCcastable materials for joint fill solutions
or coonection of precast bridge elements. With UHPC castable
you can minimizse the connection joints.

We manufacture UHPC mortar, UHPC Castable, UHPC
Shotcrete and UHPC Rapid material qualities for bridge
construction. At the customer's request, we also develop and
manufacture special qualities.

UHPC mortar, UHPC Shotcrete and UHPC Rapid are mainly
used for repairs. No extensive preparatory work is necessary
for repairs with our UHPC materials. After less than 48 hours,
our standard materials reach more than 70% of their maximum
strength. UHPC is waterproof from a layer thickness of 5 mm.

We use our UHPC TopLayer or UHPC Phalt material qualities
for bridge decks. All road surfaces can be mixed on site and
processed quickly and inexpensively with standard processing
machines.

www.hhbc-consulting.de
info@hhbc-consulting.de