It is used as a construction material and as a corrosion
protection material.
For floating windmill constructions, UHPC offers
many advantages over steel constructions and
concrete constructions.
UHPC is absolutely seawater resistant and does not
corrode. Most of the extremely expensive and
maintenance-intensive corrosion protection systems
are no longer necessary.
UHPC achieves extremely high strength values
(max. 240 MPa / 34800 psi) even without steel,
fiber or ceramic reinforcement.
UHPC can be used as a cast material, spray material
and as a mortar material.
UHPC reaches approx. 70% of its maximum nominal
strength after 48 hours.
UHPC is self-compacting in casting. During casting,
UHPC develops significantly less heat than standard
concrete. Problems like corrosion in weld seams do not
exist with UHPC.
A corrosion protection coating of the UHPC construction
is not necessary.
Due to the high strength values, the entire construction
can be optimized for the required wall thickness and
thus weight. There is also the option of using low
weight UHPC. These UHPC are half the density of
our standard construction UHPC. There is also a UHPC
that swims with a density below 1.
UHPC concrete can be manufactured and mixed locally
on site. Costly transports can be omitted.
For assembly stations in Arab, African and Indian
countries, we could offer a binder that can be
manufactured and mixed with desert sand. This
would eliminate the need for additional, costly
transports.
www.hhbc-consulting.de
info@hhbc-consulting.de
Comments
Post a Comment