UHPC Jetty constructions

For modern jetty constructions, UHPC concrete

offers many advantages compared to standard

concrete, steel or wooden constructions.

- All jetty elements can be prefabricated or cast
   on site.
- UHPC concrete has no or only extremely low
   pore volume and is thus absolutely seawater
   and corrosion resistant.
- UHPC concrete hardens under water. It can
   therefore be processed in and under water.
- UHPC concrete has a standard strength
   between 120 MPa/17400 psi and
   250 MPa/36250 psi.
- UHPC prefabricated elements can be made
   considerably thinner due to the very high
   strength and the absence of porosity, and
   thus with significantly less weight.

Due to the properties of UHPC concrete listed
above, such constructions do not require further
inspection. It can be assumed that the service
life is almost 100 years.

Since UHPC concrete has very good wear and
impact resistance, harsh harbor conditions and
extreme environmental conditions such as ice
are no problem.

Installation

UHPC concrete can be produced by us as mortar,
casting compound or shotcrete mass. For processing,
a compulsory or pan pot mixer is needed. Our
shotcrete and castable UHPC material can also be
pumped over longer distances.

Repairs of damaged standard concrete, steel or 
wooden constructions

Jetties can be severely damaged by impact, corrosion,
rotting or faulty concrete processing. The repair
with UHPC concrete is simple and requires little
effort.

For preparation, remove any loose particles and
buildup such as clams, algae and the like.
A mold should be installed around the columns.
The water does not have to be removed from the mold.
The UHPC concrete is poured directly in the water.
The concrete displaces the seawater from the mold.
The mold can be removed after less than 48 hours.

This type of repair has been used for more than 20
years as a standard repair method on offshore platforms.

www.hhbc-consulting.de
info@hhbc-consulting.de