UHPC Ultra High Performance Concrete
application in recycling plants for
- Synthetic substance - Recycling
- Plastic - Recycling
- Military equipment - Recycling
- Paper - Recycling
- Metal - Recycling
- Precious metal - Recycling
- PCBs - Recycling
- Nuclear - Recycling
The reprocessing of paper, plastic, chemical
waste, rubber and metals has become an
extremely important commodity market for
the producing industry. Much more metal
raw material is recovered from reprocessing
than mining.The material required for reprocessing is
stored on large exterior and interior surfaces.
Here, the bearing surfaces are mechanically
attacked as well as the corrosive liquids
extremely.
Many existing concrete surfaces show
considerable damage, which does not
guarantee the smooth and safe transport
of the stored goods for reprocessing.
UHPC floor systems are best suited for
these loads due to their hardness and
wear resistance. These floor systems are
laid without joints. Due to the very high
material density, penetration of corrosive
liquid with professional installation is
almost impossible.
UHPC floor and pavementsystems are
UHPC Phalt and UHPC TopLayer.UHPC Phalt is a combination of traditional
asphalt with UHPC concrete. The result is a
ground or street blast with the flexibility of asphalt
and the very high compressive strength and
wear resistance of UHPC concrete. The
processing and processing time is extremely
easy and cost effective.
UHPC TopLayer are floor coverings made of
UHPC concrete for very high mechanical loads.
The material thickness is only a fraction of
standard screeds or concretes.
UHPC TopLayer are extremely corrosion
resistant and can be installed almost on any
flooring. UHPC TopLayer achieve compressive
strengths of far more than 140 MPa
Applications- Indoor and outdoor pavements in storage areas
- Roads
- Material bunker
- Chutes
- Pneumatic transport systems
- Scrapyard pavement
- Dedusting systems
Benefits for UHPC Wear Protection
- Flexible layer thickness
- Overhead installation possible
- Jointless installation
- Extreme high compressive strength
- Very high wear resistant
- Very good corrosion resistant
- Adapts each of surface geometry
- Fast curing at ambient temperature
Benefits UHPC Phalt and UHPC Top layer- Extreme high tensile strength
- Extreme high impact resistance and ductility
- The jointless surface prohibits damages on trucks
- Can be applied thin on even the weakest base
- Freeze/thaw resistance
- Fast curing -short stop time
- Cost efficient alternative where a weak base
requires a change in both wearing course and
course
www.hhbc-consulting.de
info@hhbc-consulting.de
Comments
Post a Comment